APW3++ Power Supply Unit

Out of stock

Share Item

Description

1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer.

Specifications

Dimensions	220mm x 108mm x 62mm
Weight	2.3 kg
Noise	<43DB
DC Voltage	12.15V
Rated Current (220V input)	133A
Rated Current (110V input)	100A
Rated Power (220V input)	1600W
Rated Power (110V input)	1200W
Ripple & Noise	<1%
Voltage Regulation	<2%
Source Regulation	<1%
Load Regulation	<1%
Setup, Rise Time	<2S
Power off Protection Trip Time	>9mS
Interface Type	5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Voltage Range	100-240V AC
Starting Voltage	95-105V AC
Frequency Range	47-63Hz
Power Factor	>0.95 (full load)
Leakage Current	<1.5mA (220V 50Hz)
Low-voltage input	80-89V AC
Output Short Circuit	Yes
Output Overcurrent	134-185A max
Overheat Protection	Yes
Operating Temperature	-20* C – 50 *C
Operating Humidity	20% – 90% relative humidity (non-condensing)
Fan	Force-air cooling

APW3++ Power Supply Unit

Description

Description

Specifications

Bitmain APW7 Power Supply Unit